| Name |
Type |
Description |
Download |
| Add Daylight Sensor at the Center of Spaces with a Specified Space Type Assigned |
measure |
This measure will add daylighting controls to spaces that that have space types assigned with names containing the string in the argument. You can... |
|
| Reduce Night Time Lighting Loads |
measure |
Many buildings have lights that run unnecessarily at night. Turning these lights off at night can provide energy savings without impacting the... |
|
| Reduce Lighting Loads by Percentage |
measure |
The lighting system in this building uses more power per area than is required with the latest lighting technologies. Replace the lighting system... |
|
| SwapLightsDefinition |
measure |
This measure will swap out one lights definition for another. All objects that had referred to the original definition will now refer to the new one. |
|
| Radiance Daylighting Measure |
measure |
This measure uses Radiance instead of EnergyPlus for daylighting calculations with OpenStudio. |
|
| AedgSmallToMediumOfficeInteriorLightingControls |
measure |
This measure reduces the values associated with lighting schedules to simulate reductions due to vacancy sensors throughout the building. |
|
| AedgK12ExteriorLighting |
measure |
This measure will create exterior lights objects in four different categories described below. The lighting levels and controls will be based on... |
|
| ZEDG K12 Interior Lighting |
measure |
This measure removes all existing electric equipment objects from spaces recognized as primary or secondary school space types, with the exception... |
|
| AedgK12InteriorLightingControls |
measure |
This measure reduces the values associated with lighting schedules to simulate reductions due to vacancy sensors throughout the building. |
|
| AedgSmallToMediumOfficeExteriorLighting |
measure |
This measure will create exterior lights objects in four different categories described below. The lighting levels and controls will be based on... |
|
| AedgSmallToMediumOfficeInteriorLighting |
measure |
This measure removes all existing lighting objects from spaces recognized as primary or secondary school space types. New lighting will be added... |
|
| AedgK12InteriorLighting |
measure |
This measure removes all existing electric equipment objects from spaces recognized as primary or secondary school space types, with the exception... |
|
| SetEnergyPlusLightObjectsLPD |
measure |
Set the LPD for all lights objects in the model. Input values are in SI units. |
|
| Set Lighting Loads by LPD |
measure |
Set the lighting power density (W/ft^2) in the to a specified value for all spaces that have lights. This can be applied to the entire building or... |
|
| Add Exterior Lights |
measure |
Add exterior lighting to the building. This may be in addition to or in place of existing exterior lighting. This lighting will run from sunset... |
|
