| Name | Add_heat_recovery_chiller |
|---|
| Display Name | Heat Recovery Chiller |
|---|
| uuid | 968b3e43-1b47-4f29-b0af-f1c16b3e68c2 |
|---|
| Type | Measure |
|---|
| Language | Ruby |
|---|
| Tags | HVAC.Energy Recovery |
|---|
| Description | This measure adds a heat recovery chiller and heat recovery loop to the model. The heat recovery chiller may be an existing chiller or new stand-alone heat recovery chiller. Converting an existing chiller will allow the chiller to rejected heat to the heat recovery loop in addition to the condenser loop. A new chiller will reject heat only to the heat recovery loop. The user may specify how to connect the heat recovery loop to the hot water loop, whether the heat recovery is in series or parallel with existing heating source objects, and optionally decide whether to adjust hot water loop temperatures and add output variables. The measure DOES NOT size the heat recovery chiller or heat recovery storage objects. |
|---|
| Modeler's Description | This creates a new heat recovery loop that is attached to a tertiary node to an existing chiller or a new chiller. The heat recovery loop consists of the chiller and a water heater mixed object that is also connected to a hot water loop. The heat recovery loop and hot water loop are sized to the same user defined temperature setpoint as well as all hot water coils in the model. |
|---|
| Measure Type | ModelMeasure |
|---|
| Measure Language | Ruby |
|---|
| Intended Software Tool | Apply Measure Now |
|---|
| Intended Software Tool | OpenStudio Application |
|---|
| Intended Software Tool | Parametric Analysis Tool |
|---|
| OpenStudio Version | 3.8.0 |
|---|
| Minimum Compatible OpenStudio Version | 3.8.0 |
|---|
| README File | README.md |
|---|
| GitHub Repo | BuildingPerformanceSimulation/openstudio-measures |
|---|
