| Name |
Type |
Description |
Download |
| Thermal Bridging and Derating - TBD |
measure |
Derates opaque constructions from major thermal bridges. |
|
| Add Wind and Stack Open Area |
measure |
This measure models natural ventilation to thermal zones with operable casement type windows. It is not intended to model natural ventilation... |
|
| Add Wind and Stack Open Area Legacy |
measure |
This measure models natural ventilation to thermal zones with operable casement type windows. It is not intended to model natural ventilation... |
|
| SetRunPeriod |
measure |
Sets the run period and timestep for simulation |
|
| Add Overhangs by Projection Factor |
measure |
Add overhangs by projection factor to specified windows. The projection factor is the overhang depth divided by the window height. This can be... |
|
| Increase R-value of Insulation for Exterior Walls to a Specific Value |
measure |
Set the R-Value of exterior wall insulation to a specified value. Higher R-Values provide better insulation, lowering heat loss and heat gain... |
|
| Increase R-value of Insulation for Exterior Walls By a Specified Percentage |
measure |
Increase the R value of the insulation layer in wall constructinons by a percentage. |
|
| Increase R-value of Insulation for Roofs by a Specified Percentage. |
measure |
Increase the R value of the insulation layer in roof constructinons by a percentage. |
|
| ReduceSpaceInfiltrationByPercentage |
measure |
This measure will reduce space infiltration rates by the requested percentage. A cost per square foot of building area can be added to the model. |
|
| Increase R-value of Insulation for Roofs to a Specific Value |
measure |
Set the R-Value of roof insulation to a specified value. Higher R-Values provide better insulation, lowering heat loss and heat gain through the roof. |
|
| AssignSpacesToStories |
measure |
This measure will look as space geometry and assign each space to a story, creating new stories as necessary. |
|
| RemoveHardAssignedConstructions |
measure |
This will remove all construction assignments from made directly to surfaces or sub-surfaces. This may useful if you started with an Imported IDF... |
|
| Create Bar From Space Type Ratios |
measure |
Creates one or more rectangular building elements based on space type ratios of selected mix of building types, along with user arguments that... |
|
| Create Bar From DOE Building Type Ratios |
measure |
Creates one or more rectangular building elements based on space type ratios of selected mix of building types, along with user arguments that... |
|
| Create Bar From Model |
measure |
Create a core and perimeter bar envelope based on analysis of initial model geometry. |
|
| SetInteriorWallsAndFloorsToAdiabatic |
measure |
Set interior walls to Adiabatic and assign a hard construction. |
|
| Create Bar From DEER Building Type Ratios |
measure |
Creates one or more rectangular building elements based on space type ratios of selected mix of building types, along with user arguments that... |
|
| SetExtWallToGroundBoundaryConditionByStory |
measure |
Use this to setup one of your building stories as a basement. |
|
| SimplifyGeometryToSlicedBar |
measure |
This is an experimental measure looking at ways to simply the geometry, or to create geometry when you only no percentage of space types number of... |
|
| Merge FloorspaceJs with Model |
measure |
This measure will import a FloorspacJS JSON file into an OpenStudio model. This is meant to function in similar way to the merge function in the... |
|
| SurfaceMatching |
measure |
This will look for surfaces in adjacent spaces with similar geometry and create thermal connections between them. |
|
| Clone Building From External Model |
measure |
This measures clones the building in from an external model in place of the existing building in a model. In addition to changing the feilds in... |
|
| scale_geometry |
measure |
Scales geometry in the model by fixed multiplier in the x, y, z directions. Does not guarantee that the resulting model will be correct (e.g. not... |
|
| CleanupSpaceOrigins |
measure |
This measure will move the space origin for all spaces to the origin of bounding box closest to the model origin. |
|
| Create and Assign Thermal Zones for Unassigned Spaces |
measure |
If any spaces are not part of a thermal zone, then this measure will create a new thermal zone and assign it to the space. |
|
