Search Results
Results 1 to 50 out of 1733
Name | Type | Description | Download |
---|---|---|---|
Cooling Coils Water Multiplier | Ruby measure | This is a general purpose measure to calibrate Water Cooling Coils with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download Cooling Coils Water Multiplier |
Cooling Coils Water PercentChange | Ruby measure | This is a general purpose measure to calibrate Water Cooling Coils with a PercentChange. Repo: NREL/openstudio-calibration-gem |
download Cooling Coils Water PercentChange |
Hard Size HVAC | Ruby measure | Run a simulation to autosize HVAC equipment and then apply these autosized values back to the model. Repo: NREL/openstudio-calibration-gem |
download Hard Size HVAC |
Roof Thermal Properties Multiplier | Ruby measure | Change Roof by altering the thermal resistance, density, and solar absorptance of the wall constructions by a Multiplier Repo: NREL/openstudio-calibration-gem |
download Roof Thermal Properties Multiplier |
Water Heater Mixed Percent Change | Ruby measure | This is a general purpose measure to calibrate WaterHeaterMixed with a Percent Change. Repo: NREL/openstudio-calibration-gem |
download Water Heater Mixed Percent Change |
Cooling Coils DX Single Speed Multiplier | Ruby measure | This is a general purpose measure to calibrate DX Cooling Coils with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download Cooling Coils DX Single Speed Multiplier |
Cooling Coils DX Two Speed Percent Change | Ruby measure | This is a general purpose measure to calibrate DX Cooling Coils with a Percent Change. Repo: NREL/openstudio-calibration-gem |
download Cooling Coils DX Two Speed Percent Change |
Change R-value of Insulation Layer for Construction By a Specified Percentage | Ruby measure | Change R-value of Insulation Layer for Construction By a Specified Percentage Repo: NREL/openstudio-calibration-gem |
download Change R-value of Insulation Layer for Construction By a Specified Percentage |
Roof Thermal Properties Percent Change | Ruby measure | Change Roof by altering the thermal resistance, density, and solar absorptance of the wall constructions by a Percent Change Repo: NREL/openstudio-calibration-gem |
download Roof Thermal Properties Percent Change |
AddMonthlyUtilityData | Ruby measure | Reads in custom format and adds utility data Repo: NREL/openstudio-calibration-gem |
download AddMonthlyUtilityData |
Cooling Coils DX Two Speed Multiplier | Ruby measure | This is a general purpose measure to calibrate DX Cooling Coils with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download Cooling Coils DX Two Speed Multiplier |
Heating Coils Electric Multiplier | Ruby measure | This is a general purpose measure to calibrate Electric Heating Coils with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download Heating Coils Electric Multiplier |
Heating Coils Gas Percent Change | Ruby measure | This is a general purpose measure to calibrate Gas Heating Coils with a Percent Change. Repo: NREL/openstudio-calibration-gem |
download Heating Coils Gas Percent Change |
Heating Coils Water Multiplier | Ruby measure | This is a general purpose measure to calibrate Water Heating Coils with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download Heating Coils Water Multiplier |
Heating Coils Water Percent Change | Ruby measure | This is a general purpose measure to calibrate Water Heating Coils with a Percent Change. Repo: NREL/openstudio-calibration-gem |
download Heating Coils Water Percent Change |
Fans Percent Change | Ruby measure | This is a general purpose measure to calibrate Fans with a Percent Change. Repo: NREL/openstudio-calibration-gem |
download Fans Percent Change |
General Calibration Measure Percent Change | Ruby measure | This is a general purpose measure to calibrate space and space type elements with a percent change. Repo: NREL/openstudio-calibration-gem |
download General Calibration Measure Percent Change |
Add Monthly JSON Utility Data | Ruby measure | Add Monthly JSON Utility Data Repo: NREL/openstudio-calibration-gem |
download Add Monthly JSON Utility Data |
Calibration Reports Enhanced | Ruby measure | This measure is intended for calibibration of modeled results against user entered utility bill. Repo: NREL/openstudio-calibration-gem |
download Calibration Reports Enhanced |
Cooling Coils DX Single Speed Percent Change | Ruby measure | This is a general purpose measure to calibrate DX Cooling Coils with a Percent Change. Repo: NREL/openstudio-calibration-gem |
download Cooling Coils DX Single Speed Percent Change |
Heating Coils Electric Percent Change | Ruby measure | This is a general purpose measure to calibrate Electric Heating Coils with a Percent Change. Repo: NREL/openstudio-calibration-gem |
download Heating Coils Electric Percent Change |
Heating Coils Gas Multiplier | Ruby measure | This is a general purpose measure to calibrate Gas Heating Coils with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download Heating Coils Gas Multiplier |
Change Parameters Of Material (Layer 0 of Construction) | Ruby measure | This measure changes properties of Layer 0 for a specific construction. Repo: NREL/openstudio-calibration-gem |
download Change Parameters Of Material (Layer 0 of Construction) |
Exterior Wall Thermal Properties Multiplier | Ruby measure | Change exterior walls by altering the thermal resistance, density, and solar absorptance of the wall constructions by a Multiplier Repo: NREL/openstudio-calibration-gem |
download Exterior Wall Thermal Properties Multiplier |
Exterior Wall Thermal Percent Change | Ruby measure | Change exterior walls by altering the thermal resistance, density, and solar absorptance of the wall constructions by a Percent Change Repo: NREL/openstudio-calibration-gem |
download Exterior Wall Thermal Percent Change |
Fans Multiplier | Ruby measure | This is a general purpose measure to calibrate Fans with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download Fans Multiplier |
General Calibration Measure Multiplier | Ruby measure | This is a general purpose measure to calibrate space and space type elements with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download General Calibration Measure Multiplier |
Change R-value of Insulation Layer for Construction By a Multiplier | Ruby measure | Change R-value of Insulation Layer for Construction By a Multiplier Repo: NREL/openstudio-calibration-gem |
download Change R-value of Insulation Layer for Construction By a Multiplier |
Water Heater Mixed Multiplier | Ruby measure | This is a general purpose measure to calibrate WaterHeaterMixed with a Multiplier. Repo: NREL/openstudio-calibration-gem |
download Water Heater Mixed Multiplier |
Thermal Bridging and Derating - TBD | Ruby measure | Derates opaque constructions from major thermal bridges. Repo: rd2/tbd |
download Thermal Bridging and Derating - TBD |
Heat Recovery Chiller | Ruby measure | This measure adds a heat recovery chiller and heat recovery loop to the model. The heat recovery chiller may be an existing chiller or new stand-alone heat recovery chiller. Converting an existing chiller will allow the chiller to rejected heat to the heat recovery loop in addition to the... Repo: BuildingPerformanceSimulation/openstudio-measures |
download Heat Recovery Chiller |
Ideal Air Loads Zone HVAC | Ruby measure | This OpenStudio measure will replace the existing HVAC system with ideal air loads objects for each conditioned zone and allow the user to specify input fields including availability schedules, humidity controls, outdoor air ventilation, demand controlled ventilation, economizer operation, and... Repo: BuildingPerformanceSimulation/openstudio-measures |
download Ideal Air Loads Zone HVAC |
Export Model with Measure Changes | Ruby measure | This measure exports the in.osm file created for the simulation, moves it to a specified directory, and renames it. The default name is {name_of_parent_model}_wMeasures.osm, but a custom name can be specified. Repo: AMBER-Group-CSM/openstudio-amber-measures-gem |
download Export Model with Measure Changes |
Configure OutputControlTableStyle | Ruby measure | This measure allows users to set the column separator and unit conversion options for the OutputControl:Table:Style object in an OpenStudio model. Repo: AMBER-Group-CSM/openstudio-amber-measures-gem |
download Configure OutputControlTableStyle |
Blended Space Type from Model | Ruby measure | This measure will remove all space type assignemnts and hard assigned internal loads from spaces that are included in the building floor area. Spaces such as plenums and attics will be left alone. A blended space type will be created from the original internal loads and assigned at the building... Repo: NREL/openstudio-model-articulation-gem |
download Blended Space Type from Model |
SetNISTInfiltrationCorrelations | Ruby measure | This measure incorporates infiltration that varies with weather and HVAC operation, and takes into account building geometry (height, above-ground exterior surface area, and volume). It is based on work published by Ng et al. (2018) |
download SetNISTInfiltrationCorrelations |
Create Typical Building from Model | Ruby measure | Takes a model with space and stub space types, and assigns constructions, schedules, internal loads, hvac, and other loads such as exterior lights and service water heating. Repo: NREL/openstudio-model-articulation-gem |
download Create Typical Building from Model |
Shift Hours of Operation | Ruby measure | This measure will infer the hours of operation for the building and then will shift the start of the hours of operation and change the duration of the hours of operation. In an alternate workflow you can directly pass in target start and duration rather than a shift and delta. Inputs can vary... Repo: NREL/openstudio-calibration-gem |
download Shift Hours of Operation |
TimeSeries Objective Function | Ruby measure | Creates Objective Function from Timeseries Data Repo: NREL/openstudio-calibration-gem |
download TimeSeries Objective Function |
Timeseries Plot | Ruby measure | Creates an interactive timeseries plot of selected variable. Repo: NREL/openstudio-calibration-gem |
download Timeseries Plot |
Inspect and Edit Parametric Schedules | Ruby measure | This model will create arguments out of additional property inputs for parametric schedules in the model. You can use this just to inspect, or you can alter the inputs. It will not make parametric inputs for schedules that are not already setup as parametric. If you want to generate parametric... Repo: NREL/openstudio-calibration-gem |
download Inspect and Edit Parametric Schedules |
Replace Thermostat Schedules | Ruby measure | Replace zone thermostat schedules with other schedules in the same file. If a zone does not have a thermostat this measure will not add one. Repo: NREL/openstudio-common-measures-gem |
download Replace Thermostat Schedules |
Tariff Selection-Flat | Ruby measure | This measure sets flat rates for electricity, gas, water, district heating, and district cooling. Repo: NREL/openstudio-common-measures-gem |
download Tariff Selection-Flat |
SwapLightsDefinition | Ruby measure | This measure will swap out one lights definition for another. All objects that had referred to the original definition will now refer to the new one. Repo: NREL/openstudio-common-measures-gem |
download SwapLightsDefinition |
XcelEDATariffSelectionandModelSetup | Ruby measure | Add the selected Xcel utility rate, as well as set the timestep and lifecycle costing parameters as required by the Xcel EDA program. Repo: NREL/openstudio-common-measures-gem |
download XcelEDATariffSelectionandModelSetup |
Set Exterior Walls and Floors to Adiabatic | Ruby measure | Set exterior or ground walls, floors, and roofs to Adiabatic and assign a hard construction. Can specify through bool arguments exterior orientation for walls, as well as floors and roofs. Repo: NREL/openstudio-common-measures-gem |
download Set Exterior Walls and Floors to Adiabatic |
Tariff Selection-Generic | Ruby measure | This measure will add pre defined tariffs from IDF files in the resrouce directory for this measure. Repo: NREL/openstudio-common-measures-gem |
download Tariff Selection-Generic |
AddThermalComfortModelTypes | Ruby measure | Adds to the model (A) any of the available thermal comfort model types, and (B) work efficiency, clothing insulation, and air velocity constant schedules. Repo: NREL/openstudio-common-measures-gem |
download AddThermalComfortModelTypes |
Set Run Period Object | Ruby measure | Set Run Period Object Repo: NREL/openstudio-common-measures-gem |
download Set Run Period Object |
SetLifecycleCostParameters | Ruby measure | This measure sets the analysis type to "FEMP" and has an argument for the length of the study period in years. Repo: NREL/openstudio-common-measures-gem |
download SetLifecycleCostParameters |