Name |
Type |
Description |
Download |
NZEHVAC |
measure |
This measure replaces the existing HVAC system if any with the user selected HVAC system. The user can select how to partition the system,... |
|
GLHEProGFunctionImport |
measure |
After running GLHEPro to size the GLHE and export the G Function .idf file, use this measure to import these GLHE inputs back into the model. In... |
|
Create Variable Speed RTU |
measure |
This measure examines the existing HVAC system(s) present in the current OpenStudio model. If a constant-speed system is found, the user can opt... |
|
Radiant Slab with DOAS |
measure |
Adds a radiant slab with DOAS ventilation system to the model. |
|
Hard Size HVAC |
measure |
Run a simulation to autosize HVAC equipment and then apply these autosized values back to the model. |
|
AedgOfficeHvacWshpDoas |
measure |
Measure replaces existing HVAC system (if any) with a Water Source Heat Pump (WSHP) with DOAS HVAC system (one DOAS per floor). The WSHP with... |
|
AedgOfficeHvacAshpDoas |
measure |
Measure replaces existing HVAC system (if any) with an Air Source Heat Pump (ASHP) with DOAS HVAC system (one DOAS per floor). The ASHP with DOAS... |
|
AedgOfficeHvacVavChW |
measure |
Measure replaces existing HVAC system (if any) with a high efficiency multizone variable air volume (VAV) HVAC system (one system per floor). The... |
|
AedgK12HvacDualDuctDoas |
measure |
Measure replaces existing HVAC system (if any) with a Dual Duct with DOAS HVAC system (one system per floor). The dual duct system (separate... |
|
AedgK12HvacFanCoilDoas |
measure |
Measure replaces existing HVAC system (if any) with a Fan Coil with DOAS HVAC system (one DOAS per floor). The fan coil with DOAS system... |
|
AedgK12HvacGshpDoas |
measure |
Measure replaces existing HVAC system (if any) with a Ground Source Heat Pump (GSHP) with DOAS HVAC system (one DOAS per floor). The GSHP with... |
|
AedgOfficeHvacFanCoilDoas |
measure |
Measure replaces existing HVAC system (if any) with a Fan Coil with DOAS HVAC system (one DOAS per floor). The fan coil with DOAS system... |
|
AedgOfficeHvacRadiantDoas |
measure |
Measure replaces existing HVAC system (if any) with a Radiant Heating and Cooling with DOAS HVAC system (one DOAS per floor). The radiant with... |
|
ZEDG K12 HVAC Fan Coil DOAS |
measure |
Measure replaces existing HVAC system (if any) with a Fan Coil with DOAS HVAC system (one DOAS per floor). The fan coil with DOAS system... |
|
ZEDG K12 HVAC Fan Coil DOAS Air Cooled Chiller |
measure |
Measure replaces existing HVAC system (if any) with a Fan Coil with DOAS HVAC with air cooled Chiller system (one DOAS per floor). |
|
AedgOfficeHvacVavDx |
measure |
Measure replaces existing HVAC system (if any) with a high efficiency multizone variable air volume (VAV) HVAC system (one system per floor). The... |
|
ZEDG K12 HVAC GSHP with DOAS |
measure |
Each zone served by the DOAS (classrooms, corridors, library/media center, lobbies, mechanical rooms, offices, and restrooms) was modeled with a... |
|
ZEDG VRF with DOAS |
measure |
Adds VRF system with multiple indoor units connected to an outdoor unit. |
|
EnableIdealAirLoadsForAllZones |
measure |
This will enable Ideal Air Loads for all thermal zones in the model. This will result in disconnecting any pre-existing HVAC systems from the zones. |
|
AdjustSystemEfficiencies |
measure |
Updates heating and cooling efficiencies of all equipment in a model by a multiplier. |
|
Fans Multiplier |
measure |
This is a general purpose measure to calibrate Fans with a Multiplier. |
|
Fans Percent Change |
measure |
This is a general purpose measure to calibrate Fans with a Percent Change. |
|
Ideal Loads Options |
measure |
This measure allows the user to edit ideal air loads fields including availability schedules, maximum and minimum supply air temperatures,... |
|
Remove HVAC Systems |
measure |
This measure removes HVAC systems from an OpenStudio model. |
|
Ideal Air Loads Zone HVAC |
measure |
This OpenStudio measure will replace the existing HVAC system with ideal air loads objects for each conditioned zone and allow the user to specify... |
|